• Journal Hard Size Limit
    • Email Settings configuration

      Hi there, We are helping to our customer to install ZVR in a replication environment from Vmware to Azure, the installation was completed successfully. Now, we are trying to configure Email settings for sending Alarms as needed. Our customer uses Office365 mailboxes, we are trying to be allowed to send a test email by SMTP […]

      in: Self-Installation Questions

    • People: 2
      Replies: 1
    • September 26, 2018
    • Copying BIOS UUID

      So I ran into the issue that when we replicate our main applications it breaks licensing for those applications when you perform a failover test and access the applications in the testing environment. When you boot the VM and start the application it checks for some piece of hardware ID that is assigned to the VM […]

      in: General Discussion

    • People: 1
      Replies: 0
    • September 20, 2018
    • High RTO Recovering to Azure with Big Servers

      Hello, We’re seeing some really high RTO values when running a failover test into Azure (and I assume a failover/move would see the same) with our larger servers.  I know I’ve experienced even smaller servers being slower to come up into Azure than vCenter so I expected a bit of a difference, but for a […]

      in: Microsoft Azure

    • People: 4
      Replies: 5
    • September 18, 2018
    • from static IP to DHCP

      hey guys has someone seen this we are migrating from hyper-v to vmware but the server change their IP from static to DHCP and we have to manually accessing the servers to set the IP again I already forced from NIC options to set the IP static but no change has someone experienced this? thanks

      in: Cross-Hypervisor

    • People: 2
      Replies: 1
    • September 17, 2018
    • How's Your Linux FOTs with AWS?

      Hello My Fellow Zerto-ites! I am checking with the community to see how your experience is with using Zerto with Linux (REHL 6 and 7). Were any of you able to successfully FOT a Linux system into AWS from your Hyper V/VMWare hypervisors? Were you able to successfully connect to the Linux  recovery testing instance […]

      in: AWS

    • People: 3
      Replies: 2
    • September 14, 2018
    • One to Many vms not showing virtualizationsites/vm

      In the API, I’ve always used “virtualizationsites/{SITEIDENTIFIER}/vms” to find all of the VMs available to replicate.  Not sure when this occurred, but I noticed on 6.0u2 that this no longer retrieves VMs that would be considered One to Many.  If I pull them up in the web UI I can find the VM in the […]

      in: Scripting and APIs

    • People: 2
      Replies: 5
    • September 13, 2018
    • Migrating Azure to VMware – 2K8R2 server issues

      We have a customer that wishes to move out of Azure to one of our onsite premises. However after replicated, running a failover test we have discovered that all of their 2008R2 VMs will not boot. Server 2012 R2 VMs boot without issue. We did encounter the VMtools issue which we resolved by doing these […]

      in: Cross-Hypervisor

    • People: 2
      Replies: 2
    • September 12, 2018
    • Host version 6.1.7601 is not supported

      Trying to install a VRA to a host in SCVMM that is showing host version of 6.1.7601. Have verified that SCVMM is working correctly and not sure what to do to install this VRA. Has anyone managed to get this going on this version (Windows 2008 R2 SP1 Enterprise), or do I need to update […]

      in: Hyper-V

    • People: 2
      Replies: 1
    • September 11, 2018
1 2 3 … 129 130 131 … 156 157 158