• This forum has 41 topics, 92 replies, and was last updated April 19, 2022 by Shannon S.
    • Cross-Hypervisor
    • Types of thesis statement along with examples

        Assignments, quizzes, and tests are all integral parts of academics. These can become really tedious when essay writer has to be prepared for all of them especially when deadlines might overlap. However, knowing the tricks of each and how to overcome them can be the best solution possible. Essays and research papers are among the most […]

    • People: 3
      Replies: 2
    • April 19, 2022
    • Ubuntu 14 and 16 Hyper-v to VCD

      Hi, we have an issue with Ubuntu VM v 14 and 16  (hyper-v –> VCD).   When they failover to vcloud the Network is not mapped to vapps and the nic show not connected.  For all other OS its work fine (windows,centos/ubuntu 18 and 20).  What is weird the re-ip work when we do it manually […]

    • People: 3
      Replies: 2
    • March 17, 2022
    • Hyper-V – VMWare VCD Nic Issue

      We are currently seeing an issue when replicating from Hyper-V to VMWare VCD. The VM’s are replicating without an issue but when we do a failover through Zerto, VMWare isn’t booting the VM’s with any NIC’s attached to them.   We do have the NICS configured on the VPG and VCD Customization is enabled but […]

    • People: 2
      Replies: 1
    • October 22, 2021
    • Zerto System Center Operations Manager (SCOM) MP?

      Hello folks! Our organization recently purchased and setup the Zerto 9 suite and we are well on our way in our DR planning and implementation project. I’m also being involved with setting up alerting and monitoring for our systems and we are utilizing System Center Operations Manager in tandem with the rest of the System […]

    • People: 2
      Replies: 1
    • October 21, 2021
    • Force vmxnet3 instead of e1000 for linux

      Hi, Is there a way to force a linux vm failover and use vmxnet3? (we always preinstall the open-vm-tools).  Because otherwise its a pain to remove the e1000 NIC and add a vmxnet3 and redo all IP configuration.   ex: a setting in tweaks.txt like this forceVmxnet3forLinux: true   🙂

    • People: 1
      Replies: 0
    • October 15, 2021
    • Shared HyperV to VMWare

      Im looking at Zerto to migrate from a shared HyperV environment to our own VMWare. Firstly is there any guides or tips for HyperV to VMware for common gotchas? Secondly, the HyperV is shared so the VMM account I have only allows me to see our VMs. Will this actually work for setting up Zerto?

    • People: 2
      Replies: 1
    • August 18, 2021
    • Additional Hyper-V Hosts

      I have recently added 4 new hosts to my Hyper-V environment.  When I go to create a new VPG in my VMWare environment, the new hosts do not show in the host drop down. I have reconfigured in both sites and re-paired the sites. They new hosts still do not show. The VRA’s are running […]

    • People: 2
      Replies: 1
    • February 17, 2021
    • ZVM page elements not loading

      Hello, I want to convert one VM from vmware 5.1 into Hyper-V 2016. I installed 2 machines in each site, and installed ZVM in each one. One will connect to the Vcenter, while the other will connect to SCVMM 2016. In the Vmware side i can logon to the ZVM console and i can see […]

    • People: 1
      Replies: 2
    • November 2, 2020
    • Hyper-v Replica and Zerto replication together

      In reference to this KB https://www.zerto.com/myzerto/knowledge-base/why-cant-i-select-a-vm-for-replication/. Specifically about Hyper-V Replica’s: In a Hyper-V environment: VMs that are part of Hyper-V Replica. This feature creates duplicates of VMs which are problematic for Zerto to track. In order to disable Hyper-V Replica for VMs you wish to protect, please right click them and select ‘Remove replication’. Is […]

    • People: 2
      Replies: 1
    • July 20, 2020
    • Hyper-V to VMware

      Hello there, We are replicating to Hyper-v to VMware when I test failover the VM boot up in 2 minutes but when I try to Live Failover, failover in progress %58 and I see a task on vcenter is move file and its going really slowly I mean 120 GB live failover takes 1 hour […]

    • People: 2
      Replies: 2
    • June 30, 2020
    • Nimble upgrade and additional storage

      Recently we added more Nimble storage and had to upgrade to version 5.1.4.0-683149-opt. Nimble says that to use the full array we need to create new datastores in VMware 6.7 and move the VM’s to the new datastores. Interested if this will affect the Zerto replication VPGs? Has anyone had any experience with this and […]

    • People: 1
      Replies: 0
    • May 26, 2020
    • Capability for Physical Replication and Migration

      Hi, I know Zerto is capable of Virtual to Virtual Replication and Migration. H0wever I want to know if this tool is capable of doing Replication and Migration between Physical to Virtual, Physical to Physical workload replication and migration. Regards, Pravin

    • People: 2
      Replies: 1
    • May 11, 2020
    • Replication between vmware to hyperv

      hi, i’m trying the replica zerto between vmware 6.7 and scvmm 2016 I’ve created a VPGs with 5 VMs and i’m doing some failover test but one od the VMs in every test doesn’t boot because doesn’t have the bus and the disk… the stranger thing is the the vm change every test… reading the […]

    • People: 1
      Replies: 0
    • October 9, 2019
    • From hyper to VMware – no ip sync

      Hi ,   we are migrating an environment from hyper-v 2012 to vmware 6.7 i’ve successfully create the ZVM and deployed the ZVRA i’ve also created the first two VPG , both with just 1 VM inside. trying to failover the first VPG (as a test) the machine is correctly powered on on the destination […]

    • People: 4
      Replies: 4
    • October 4, 2019
1 2 3

You must be logged in to create new topics. Click here to login