-
- O2M with multtiple sites in a Zorg
-
-
Failover Clarification
in: General Discussion
Since approval to try this in our environment is not worth asking for … What happens in this scenario? Site1 legitimately goes down. Site1 is unusable for several days, but hardware is all in tact. Site2 brings up servers using Failover, sets to reverse protect, and commits the action. Once Site1 becomes usable […]
-
People: 2
Replies: 1 - June 22, 2017
-
Support documents images and links broken
in: General Discussion
Hi. I have tree points to discuss here. As a customer, I discovered that they are some documents into the knowledge-base that haves image links or lost references: As an example I’m copying two bellow: 1-Broken Images: Pre/Post Recovery Scripts with Zerto 2-Broken Link: Zerto Virtual Replication Journal Overview and Best Practices (On these one […]
-
People: 2
Replies: 2 - June 22, 2017
-
API 5.0 update 3 Changes
in: Scripting and APIs
From ZVR 5.0 update 3 release notes users may have seen an update to ZVR API which was a security improvement, which may cause some existing scripts now not to function on ZVR 5.0 update 3. This is down to the accept headers set in the scripts. This is a quick and easy fix, first […]
-
People: 2
Replies: 1 - June 20, 2017
-
JBOSS Cluster Supported
in: General Discussion
I know most database-oriented clustering schemes with multiple VMs sharing common storage are incompatible with Zerto, but what about JBOSS clusters, where the separate JBOSS instances can be automatically clustered to improve load performance, but persistent storage is not involved? For reference, here’s the relevant JBOSS documentation: https://docs.jboss.org/jbossas/jboss4guide/r4/html/cluster.chapt.html Thanks!
-
People: 2
Replies: 1 - June 17, 2017
-
CSP (DraaS Provider) Firewall Lock Down
in: General Discussion
Hi All, I wanted to ask if any CSP using DRaaS have attempted to lock down VPN Connectivity between customer sites successfully when using Port ranges from 9802 and up. I have managed to get this to work one a small subset of clients, but if we have 100 plus customers if the port range […]
-
People: 2
Replies: 1 - June 15, 2017
-
Upgrade from 5.0u2 to 5.0u3 fails
in: VMware
Running VMWare at both production and DR sites. Currently running Zerto v5.0u2. Started the upgrade process to v5.0u3 and I was met with an error: “An error has occurred. MSI Error code: -2147023271” I’m going to open a support ticket but I thought I’d pose the question here, in the event someone else has seen […]
-
People: 2
Replies: 2 - June 15, 2017
-
vCommander/Zerto Integration Scripts
in: Scripting and APIs
Script sample to tie Embotics vCommander organizations to VPG’s in Zerto for customer self service provisioning with DR protection. Obviously these can be tweaked for alternate use cases. http://support.embotics.com/solution/articles/8000042740-embotics-vcommander-zerto-integration
-
People: 2
Replies: 1 - June 15, 2017
-
PowerShell – Getting Started
in: Scripting and APIs
I’ve found several posts/articles/blogs about running your first PowerShell CmdLets, etc. However, I can’t find how you actually install those CmdLets. If I run “add-pssnapin Zerto.PS.Commands”, PowerShell gives an error that “No snap-ins have been registered for Windows PowerShell version 4”. I see the DLL of the same name in the Zerto installation folder, but […]
-
People: 7
Replies: 8 - June 14, 2017
-
5.0 update 3 API Changes
in: Scripting and APIs
If any customers have been running our Zerto scripts which we provide as examples (whitepapers) on versions 5.0 update 2 and below then please have a read of the below: As per our release notes in 5.0 update 3 there was a change in the API which gives Zerto better security. I have seen numerous […]
-
People: 1
Replies: 0 - June 12, 2017
-
Changing ZVM Page from IP to Host Name
in: Self-Installation Questions
Hi all. I made the installation and everything seems to be working fine. I just have an issue where, I used the IP address during the installation process for the ZVM. I would like to use the machine’s host name instead of IP to connect. Is there any way that I can change it? […]
-
People: 1
Replies: 1 - June 5, 2017
-
Migrating from old vCenter to new vCenter
in: VMware
Hello Folks, So what I am looking to do is use Zerto to facilitate my migration from my old vCenter to a new vCenter (hardware refresh). After that is complete, the old vCenter will be shut down. The new vCenter will be replicating, using Zerto, to a DR site. So the ZVM that I have […]
-
People: 3
Replies: 4 - June 2, 2017
-
Zerto One to Many Failover/Migration
in: General Discussion
Is it possible to setup a VPG between 3 VMware Sites (e.g. A, B, C) , Initiate a failover/move from primary site (A) to one secondary site (B or C), then following move / failover event make site B or C primary and have replication update from (B to A and C) or (C to […]
-
People: 2
Replies: 3 - June 1, 2017
-
ZVM – Upgrade from 2008R2 to 2016
in: General Discussion
My ZVM machines are currently running on Windows Server 2008R2. Sooner or later Zerto (and Microsoft) are going to deprecate support for 2008R2. I’d like to do an in place upgrade from 2008R2 to 2016. My question is, has anyone done this? Any gotchas? Specifically relating to Zerto, any issues with the ZVM software post […]
-
People: 3
Replies: 2 - May 24, 2017
-
Feature Request – Better VM to ESXi distribution
in: VMware
We create VPG’s by pointing them at Resource Pools rather than individual hosts. I’m finding that Zerto does not spread VM’s across hosts within a cluster when doing this. I setup one today that pointed 3 of 4 large busy VM’s at a single host rather than spreading across the cluster. Replication traffic is pounding […]
-
People: 3
Replies: 4 - May 19, 2017
-
Specify Resource Pools during VPG creation
in: Scripting and APIs
Hi all! I’m am trying to figure out how to specify a Resource Pools when creating the VPG using the script from the Automating Zerto whitepaper v2.0. All I am able to do is pick the parent cluster, but not anything underneath it. As an example, the options presented via $VISiteInfoCMD2 from the script (run after […]
-
People: 2
Replies: 2 - May 17, 2017
-
Failover Clarification