• General Discussion
    • CSP (DraaS Provider) Firewall Lock Down

      Hi All, I wanted to ask if any CSP using DRaaS have attempted to lock down VPN Connectivity between customer sites successfully when using Port ranges from 9802 and up. I have managed to get this to work one a small subset of clients, but if we have 100 plus customers if the port range […]

    • People: 2
      Replies: 1
    • June 15, 2017
    • Zerto One to Many Failover/Migration

      Is it possible to setup a VPG between 3 VMware Sites (e.g. A, B, C) , Initiate a failover/move  from primary site (A) to one secondary site (B or C), then following move / failover event make site B or C primary and have replication update from (B to A and C) or (C to […]

    • People: 2
      Replies: 3
    • June 1, 2017
    • ZVM – Upgrade from 2008R2 to 2016

      My ZVM machines are currently running on Windows Server 2008R2. Sooner or later Zerto (and Microsoft) are going to deprecate support for 2008R2. I’d like to do an in place upgrade from 2008R2 to 2016. My question is, has anyone done this? Any gotchas? Specifically relating to Zerto, any issues with the ZVM software post […]

    • People: 3
      Replies: 2
    • May 24, 2017
    • VMware free?

      I am running the free version of ESXi/vSphere 5.5 here at my office (very small environment). Will Zerto support that for offsite replication to a cloud provider?   Thank you.

    • People: 2
      Replies: 1
    • May 4, 2017
    • VPG Creation – Syncing (0%) from couple hrs

      Hi, I created a new VPG, added a VM to it and completed the configuration. The VPG is at Initializing screen and is shows ‘Syncing as (0%)’ from couple hours. The syncing percentage has to change but due to some reasons the percentage is not moving. What needs to be done to fix the issue? […]

    • People: 2
      Replies: 1
    • April 13, 2017
    • Zerto V4.5 v/s V5.0

      HI, We are using Zerto 4.5 with VMware environment. Recently, We face some DB level corruption on high I/O servers. I want to know the bug (Customer Number 91652,93353) you have closed in version 5 can be the reason for all this?

    • People: 2
      Replies: 1
    • April 13, 2017
    • Managing Alerts Multi Peer sites

      Hello, I’m finishing up a Zerto 5u1 install. We have 3 vCenters at our protected site and 2 at our recovery site. I have alerting setup to send to my email address but will need to expand that to a larger group. I’m finding that I get a lot of duplicate alerts sent from various […]

    • People: 2
      Replies: 2
    • March 23, 2017
    • too much time for Delta sync

      hi guys Am I the only one facing this, we have some big VMs we do Live Failover, different reasons and Test Failover is not an option. so Last time for a 1.5 TB VM it took 27 hours the delta sync…. I was thinking If had opened the bandwidth for at least 100 or […]

    • People: 2
      Replies: 3
    • February 28, 2017
    • Cloud migration

      Does Zerto support replication from Non-cloud virtual environment like VMware vSphere to Cloud environment? Are Softlayer, SCE+ the supported cloud environments by Zerto?

    • People: 2
      Replies: 1
    • February 28, 2017
    • ZCP 5.0 Basic isn’t available in "My Course"

      Hi,   I want to do the training for ZCP 5.0 Basic Cert, but it isn’t available in “My Courses”. Only “What’s new” is availbale. Am I’m doing something wrong? BTW: The Redirect from the “training”-link at the zerto main-page works only with Internet Explorer. With Chrome for example you always get back to the main-page ;). […]

    • People: 5
      Replies: 6
    • February 24, 2017
    • VRA Replication traffic using ESXi Mgt Int

      Greetings, We recently purchased Zerto licensing to support a data center migration project and eventually building a new DR. In planning our Zerto install we have a particularly sensitive and network constrained DMZ cluster (that is part of a vCenter 5.5 with other ESXi 5.5 clusters). The DMZ cluster has guest networking and ESXi management networking as […]

    • People: 3
      Replies: 5
    • February 8, 2017
    • Journal Sizing Tool help

      I needed some help with estimating journal sizes. I found the tool here: https://www.zerto.com/myzerto/technical-documentation/?search=Journal%20Sizing%20Tools A few questions on this: 1. How current is this, and what version of Zerto does this tool apply to? 2. Is there any supplemental help documentation in relation to this tool? 3. I noticed the zip contains several different version […]

    • People: 2
      Replies: 1
    • February 6, 2017
    • Network Address Translation

      For situations where some applications may have hardcoded / absolute IP addresses is it possible to create a scenario with NAT?  The notion would be that a NAT device residing in the target site would front end the replicated machines.  Should an outage occur, then only DNS would need to be changed, but not the […]

    • People: 2
      Replies: 1
    • January 13, 2017

You must be logged in to create new topics. Click here to login