• SAN upgrade
    • "Change VM recovery VRA"

      Hi All, Zerto offers a feature that should allow to perform maintenance on vmware hosts without having impact on running VPGs. All inbound VPG/VMs can be moved to other esxi host with, so called “Change VM recovery VRA”. This feature works well if you are not performing changes on your infrastructure. Unfortunately logic that is […]

      in: General Discussion

    • People: 2
      Replies: 1
    • December 19, 2017
    • Zerto Cloud Connector static routes

      Hi All, I’ve deployed zerto cloud connector for one of our customers. Our CSP deployment has ZVM, ZCM on one network (managemnet) and Z-VRAs on another network (storage). Both networks are routable. ZCC had been deployed with two interfaces: customer facing netwokr and our management one. Unfortunately the static route that we should be able […]

      in: VMware

    • People: 5
      Replies: 9
    • December 19, 2017
    • Can VRA have a multiple vNICs ?

      Hi all I have trouble configuring ZVR for the customer. In the attachment you can see the current configuration diagram and the problem in configuring ZVR. I would like to find a way to solve this configuration. Help me !!! Thank you.

      in: Hyper-V

    • People: 4
      Replies: 8
    • December 18, 2017
    • Initial Sync 100% but Still showing Initializing

      Hi Experts, I have one VM (17 TB) in my VPG and initial replication got completed in 24 hours (it was showing 32% in 23 hours but went 100% in last one hour). In Dashboard, VPG health is green and 17TB as protected but VPG status is shown as processing for last 10 hours. Please […]

      in: VMware

    • People: 2
      Replies: 1
    • December 11, 2017
    • VRA install does not see DVSwitch networks

      I’ve just been handed an issue where, upon installing a VRA onto a group of ESX hosts (v5.5.u2) the VRA install wizard is unable to see the DVSwitch networks, only the standard switch networks. Networking on this host works as expected, otherwise.   Has anyone encountered this and if so, what was your solution? Regards, […]

      in: VMware

    • People: 6
      Replies: 6
    • December 11, 2017
    • New VPG with REST API from vCloud Director site

      Official document – Zerto Virtual Replication RESTful APIs Version 5.0 U3, states on page 12 that vpgSettings API does not support vCloud Director, preseeding, setting backup, AWS, etc POST method to “https://zvm_ip:port/v1/vpgs” should “Create a VPG”, but again the VM is random one and not the one in vDC vApp. Can anyone suggest if I […]

      in: Scripting and APIs

    • People: 4
      Replies: 5
    • December 7, 2017
    • Change on CPU / Memory – replication

      Hi all,   Silly question –  If we change the number of CPUs in the production site, does it replicate automatically to the DR / destination site? Do we need to make anything to ensure the change?   We are on the middle of a Synch to a destination site and number of CPUs of […]

      in: VMware

    • People: 3
      Replies: 3
    • December 6, 2017
    • Multiple ZVMs and on vCenter

      I am wondering if it is possible to have multiple ZVM setup in the same location, and sync’d to the same vCenter? With the ability to leverage the same storage and hypervisors as the first ZVM? The issue I am trying to get around is that the primary ZVM is having upgrade issues from 5.0 […]

      in: VMware

    • People: 2
      Replies: 2
    • December 5, 2017
    • Zerto Installation FAQ

      NOTE: for any break/fix issues or bugs please open a case with Support through the ZVM GUI, or through your Support portal here on MyZerto   Welcome the Implementation Services Zerto FAQ. Please note we have pulled our 4.0 FAQ from this thread as we finalize updates to our 5.x FAQ. Once the 5.x FAQ is complete, this […]

      in: Self-Installation Questions

    • People: 7
      Replies: 7
    • November 29, 2017
    • VRA not reporting VMs

      My customer has a remote site with a quite bad connection back to HQ. I managed to install VRAs on the hosts at the site, which took some hours, but the site’s virtual machines are not visible in the ZVM UI. The ZVM is located at HQ. I suspect the connection is the problem here. […]

      in: VMware

    • People: 2
      Replies: 5
    • November 29, 2017
    • Zerto not supported on UCS using FCoE?

      This is a troubling statement in the 5.5u2 release notes under known issues page 21. We have well over 100 UCS ESXi hosts using FCoE and Zerto ZVM’s and VRA’s all use storage that is connected via FCoE (the only way you can connect to FC storage on UCS blades)..   Virtual Replication Appliance (VRA) […]

      in: General Discussion

    • People: 3
      Replies: 5
    • November 28, 2017
    • Journal History empty?

      Hi I am trying to replicate virtual machines from Hyper-V (Win2012R2) to ESXi6.0. I am able to create protection group an successfully do the initial replication. Couple of minutes after the initial replication I get an alert: “The VPG has been protected for x minutes but the journal history is only 0 seconds” and “History […]

      in: Cross-Hypervisor

    • People: 2
      Replies: 3
    • November 28, 2017
1 2 3 … 138 139 140 … 157 158 159