• This topic has 1 reply, 2 voices, and was last updated October 24, 2019 by Elad D.

Connection host, zerto vm and vra

  • Hi,
    I read from documentation that VRA and hosts must be to same network..is right?
    While zerto vm management how communicate with hosts and vra? Particular network port?
    And with vcenter?
    Thanks

    Hello,
    This is Elad from Zerto support.

    The requirements for VRA installation can be found in the following link:
    http://s3.amazonaws.com/zertodownload_docs/Latest/Zerto%20Virtual%20Replication%20Zerto%20Virtual%20Manager%20%28ZVM%29%20-%20vSphere%20Online%20Help/index.html?cb=1571910394#page/AdministratorforZertoVirtualManager%2FManageVRA_VC.11.02.html

    Please note that I’ve seen some networking issues when the VRAs were not on the same network as the hosts.
    Therefore, I would recommend putting the hosts and the VRAs on the same network.

    Regarding the needed network ports, Zerto utilizes a few ports as described on page 7 on the following link:
    http://s3.amazonaws.com/zertodownload_docs/Latest/Zerto%20Virtual%20Replication%20Installation%20Guide%20for%20vSphere%20and%20Hyper-V.pdf?cb=1571910394

    Please let me know if you have any further questions.

The forum ‘Support Q & A’ is closed to new topics and replies.