This topic has 1 reply, 2 voices, and was last updated September 16, 2019 by Brian S.

Bandwidth and Throttling – Sultan Ahmed

Or B
September 16, 2019 08:22:46 AM

<p class=”x_MsoNormal”>Hi,</p>
<p class=”x_MsoNormal”>In our Zerto configuration we have this setting for Bandwidth Throttling (Site setting -> Performance and Throttling -> Bandwidth -> Bandwidth Throttling -> “100”). What is the meaning of this setting? We have a 300 mbps line.</p>

Brian S
September 16, 2019 09:13:42 AM

Hi there,

Brian from Zerto here.

Bandwidth Throttling is defined to control the amount of traffic going out of your site. When defined, this is the maximum bandwidth that Zerto uses from this site to all peer recovery sites.

If you do not specify bandwidth throttling, the default is for Zerto to automatically assign the bandwidth used per VPG, based on using the maximum available and then prioritizing the usage according to the priority set for the VPGs sending data over the WAN.

For more information, please refer to our Online Guide “Defining Performance and Throttling”:

http://s3.amazonaws.com/zertodownload_docs/Latest/Zerto%20Virtual%20Replication%20Zerto%20Virtual%20Manager%20%28ZVM%29%20-%20vSphere%20Online%20Help/index.html#page/AdministratorforZertoVirtualManager/AdvancedConfiguration_VC.14.04.html

Best regards,

Tagged: bandwidth limit Bandwidth Throttling Throttling

You must be logged in to create new topics. Click here to login