Article number
000004690
Affected Versions
All
Source Hypervisor
All
Target Hypervisor
All

How to Determine the IP-addresses, URLs, and WAFs that the ZVM will Communicate with when Zerto Analytics Feature is Enabled

Viewed 526 times

Summary

An administrator might see on his firewall outgoing traffic from the ZVM to IP-addresses, URLs, and WAFs when the Zerto Analytics feature is enabled. Alternatively, an administrator may need to know the requirements ahead of install/enabling of Zerto Analytics to ensure it is working at start.

Steps

The ZVM will need to communicate with the following URLs:

  • Google Analytics - google-analytics.com

  • CallHome - autologs.zerto.com

  • Zerto Analytics - Receiver DNS address zerto-mobile-data.zerto.com

  • Upgrade Manager - zerto-msgs-for-sites.saas.zerto.com

  • RLC - zerto-msgs-for-sites.saas.zerto.com

  • ZCA auto update - zerto-msgs-for-sites.saas.zerto.com

In addition, The ZVM might be communicating with the following WAF (Web Application Firewall) IPs:

  • 199.83.128.1 - 199.83.135.254

  • 198.143.32.1 - 198.143.63.254

  • 149.126.72.1 - 149.126.79.254

  • 103.28.248.1 - 103.28.251.254

  • 185.11.124.1 - 185.11.127.254

  • 45.64.64.0 - 45.64.67.255

  • 192.230.64.1 - 192.230.127.254

  • 107.154.0.0 - 107.154.255.254

  • 45.60.0.1 - 45.60.255.254

  • 45.223.0.1 - 45.223.255.254

  • 2a02:e980:0:0:0:0:0:0 - 2a02:e987:ffff:ffff:ffff:ffff:ffff:ffff (IPv6 if used)