• This forum has 543 topics, 1,440 replies, and was last updated April 19, 2024 by Yossi A.
    • VMware
    • Removing Zerto from ESX hosts

      Good morning, A client I’m working with currently has Zerto DR VM’s running on each of their 2 ESX hosts. We are in the process of vMotion VM’s all to one ESX to repurpose one ESX host with Hyper-V. Is there any documentation or process or removing Zerto from the ESX host? I don’t want […]

    • People: 2
      Replies: 1
    • April 9, 2018
    • Can zerto exclude file or path during replication 1 2

      Dear all Hi i want to know can zerto exclude file or path during replication for linux vm ? for example i have a linux vm now i want replicate this vm but don’t want replicate this path : /etc/sys-config/network-script/ifcfg-eth0 can do it?

    • People: 5
      Replies: 17
    • April 3, 2018
    • Migrate Windows vCenter v5.5 to v6.5 vCSA

      As Mike T pointed out in his post : VMware has a supported migration path from a Windows vCenter Server v5.5 to the v6.5 vCenter Server Appliance (link) . If we upgrade our Zerto to v5.0U1 first, what considerations should we be aware of if we migrate to the appliance (as this appears to be the […]

    • People: 5
      Replies: 5
    • March 23, 2018
    • Can I use the same client vCenter with 2 ZVMs?

      I have a client replicating to us already however we are separating some of their business to replicate to another ZVM in our other office. So the respective VMs will be moved to dedicated hosts so that VRAs are specific for each ZVM however they share a single vcenter. Will this work or will I […]

    • People: 4
      Replies: 3
    • March 19, 2018
    • Issue Moving Data to New Recovery Datastores

      Running v4.5u1, vCenter target.  I need to move recovery data from existing datastores to new datastores on our new storage array.  According to the documentation, once the new datastores are added to the ZORG on the ZCM, I can simply edit the VPG, and change the  “Recovery Volume Location” on the “Storage” tab. I did […]

    • People: 3
      Replies: 3
    • March 16, 2018
    • VPG's go offline during Host maintenance

      Hi, i’m hoping this is a basic issue! When we created our VPG’s we selected the entire cluster for recovery host hoping that during ESX host maintenance the VPG would use another host in the cluster for replication and recovery. Today I placed a host in maintenance mode and all VPG’s associated with that host […]

    • People: 5
      Replies: 4
    • March 8, 2018
    • VPG Best Practice

      I am creating new VPG’s in Zerto (Version 6.0 Patch 2) and would like to know some best practices in doing so.  More specifically in regards to replication and storage.  Do you typically have a dedicated Datastore for the recovered VM/volumes?  What is the typical journal history settings and do you use the advanced journal […]

    • People: 2
      Replies: 1
    • March 6, 2018
    • ESXi host migration

      currently I have esxi host running with old hardware and would like to techfresh esxi host hardware which is running 5.5 to new hardware with esxi 6.0. Can you please advise what is the best practice the to do so?

    • People: 2
      Replies: 8
    • March 5, 2018
    • VM startup delay between VPGs

      Hi, I know that if a VPG contains multiple VMs, you can set a startup order. I have 11 VPGs each containing a single VM. Can I failover these VPGs in a particular order?

    • People: 5
      Replies: 9
    • February 28, 2018
    • vCenter migration including new AD domain

      Greetings, We are preparing for upgrading to vspshere 6.5.x. Part of this requires us to upgrade to Zerto 5.5 prior to the VMware upgrade. We have 5 vcenters that are connected together in Zerto including a ZCM that are all on 5.0u1. We will only be upgrading 3 of the 5 vcenters (and hosts) to […]

    • People: 2
      Replies: 2
    • February 14, 2018
    • Disable WAN Compression

      hi guys my customer wants to use some Riverbead WAN Optimization-compression but for what I read WAN Compression can be disabled, I see when I create a VPG is enabled by default, is that Global setting or per VPG, and how to do it either globally o per VPGs thanks

    • People: 3
      Replies: 8
    • February 1, 2018
    • 5.5

      Hi If we are not using any cloud platform (only our on-premise), is there any advantage to upgrade our one to many 5.0 to 5.5?a

    • People: 2
      Replies: 2
    • January 31, 2018
    • Live Failover button grayed out

      Hi Everyone,   Wondering if you’ve experience this issue before.  I was trying to do a live failover but the ‘failover’ button is grayed out!  The machines I want to failover are all synced, so I’m not too sure what would be causing it to not move forward. Any suggestions will be greatly appreciated.   […]

    • People: 2
      Replies: 3
    • January 29, 2018
1 2 3 … 27 28 29 … 35 36 37

You must be logged in to create new topics. Click here to login