• VMware
    • Issues with vCD waiting to import vm

      Hi All,   Is anyone running verison 6.5U3 with vCD 9.1. We recently went to 6.5u3 to fix import time out issues, in the lab its checked out ok, but it appears in live when doing a test fail over it’s sitting at 27% , creates the vAPP but does not import the VM. It […]

    • People: 3
      Replies: 5
    • May 16, 2019
    • Using Zerto to replicate AD/DC VMs

      Hi all, i think the answer is yes it should be fine but just want to confirm.  If i’m replicating an organizations entire environment, maintaining IP address in the DR site, vcloud to vcloud.  DC shouldn’t have any issue coming up on the DR site in a full live failover?

    • People: 2
      Replies: 1
    • May 16, 2019
    • Using Zerto to seed Replication

      I have a scenario where I need to replicate 15 TB from the UK over a 20 Mbps connection. Can I use Zerto to replicate a copy of live VMs to a local NAS and then ship the NAS to my US data center to “Seed” the initial replication and then use Zerto to replicate […]

    • People: 3
      Replies: 2
    • May 3, 2019
    • Journal History function and concept

      Dear all Hi although I was read some documents but actually I am so confused in many parts during wizard configuration for example when I set Journal History = 1 Hours Is that means it will keep restore points maximum for one hours ago ? actually what happen will be do after 1Hours ?   […]

    • People: 2
      Replies: 2
    • April 30, 2019
    • vsphere encrypted vmdk's

      has anyone implemented zerto with vsphere encrypted vmdks? would assume that since zerto leverages as much of vspheres own tools this should be ok, and appears head and shoulders above bitlockering disks there should be little issue but wondering if anyone can confirm or deny it works properly without my having to rattle supports cage,

    • People: 1
      Replies: 0
    • April 24, 2019
    • vSAN Storage Policy change

      I noticed that there is no option to change the vSAN storage policy when replicating to vSAN.  It accepts the default storage policy.  As I am replicating some large VMs and space will be a little tight, rather than migrate –> cutover –> change policy from mirroring to erasure coding, can I just locate the […]

    • People: 1
      Replies: 0
    • April 2, 2019
    • Zerto + Veeam

      Hi All, Just a quick one has anyone had a client use Zerto to also replicate a Veeam Proxy server. These obviously attach disks to preform the required backup then removes them a short time later once the backup has been completed. As those newly attached disks sit in path has anyone seen issues in […]

    • People: 3
      Replies: 4
    • March 28, 2019
    • no networks appear in vapp network mapping

      we’ve recently deployed a ZCC to bridge a customers vCent environment to our vCloud Director environment. Customer is running vCent 6.0 with ZVM 4.5 whilst we are running vCloud Director 5.0 with ZVM 4.0. When customer creates a VPG they can cycle through the the wizard after selecting their source VM, the target site etc […]

    • People: 4
      Replies: 4
    • March 28, 2019
    • How to get a clone of a VM at recovery site?

      Hopefully I can explain this properly to get a good answer. We have a site that we are replicating to our production environment with the intent to fail over those servers permanently at the end of April to run in production. Before then, we need a local clone of a specific test server in the […]

    • People: 2
      Replies: 2
    • March 22, 2019
    • Files corrupted after failover

      Hi, Has anyone ever faced files corruption after the failover from one site to another? We recently migrated one server from one datacentre to another using Zerto and after migration some files were corrupted on FS level. Virtual machine was up and running, but some files inside of VM were missing or corrupted. I was […]

    • People: 4
      Replies: 3
    • March 21, 2019
    • Site disconnection

      Hi, we have successfully installed 4 vra on PROD and 3 vra on DR site. When we create a VPG on a vm which sits on one of the esxi host on PROD we are constantly getting site disconnection error. However when the vm is migrated to the other 3 host on PROD, it works […]

    • People: 1
      Replies: 0
    • March 15, 2019
    • Changing UUID breaks VPG

      As we are working within our new Zerto environment, we ran across a workload that required (for licensing) that the UUID of the VMs do not change when being orchestrated for testing recovery. We have found a solution to this problem by altering the source VMs to include the option “uuid.action = “keep” that will […]

    • People: 2
      Replies: 2
    • March 13, 2019
    • Zerto in a multi-site VCSA

      Aloha, We are moving from a 5.5/multi-vcenter to a 6.7U1 multi-site/single VCSA environment. At this point, I don’t see how Zerto would be configured. But first things first – trying to install Zerto on a new VM in the VCSA. I give it my root creds for the VCSA and the install throws an error. […]

    • People: 3
      Replies: 4
    • March 11, 2019
    • VRA resources

      Hi Group, I was wondering what everyone was doing for resources (CPU/Memory) on their VRAs?  Currently the default is 1 CPU and 3 GB of RAM.  I’ve just up the CPU to 2 and RAM to 8 GB.

    • People: 2
      Replies: 1
    • March 7, 2019

You must be logged in to create new topics. Click here to login